FrameMaker Ver.6E (PC) magicolor 7300 MECHANICAL/ELECTRICAL
02.08.08
7-13.
Transfer Belt Cleaning Mechanism
• The Cleaning Blade scrapes any residual toner off the surface of the Transfer Belt.
• The Cleaning Blade uses a fixed blade method in which the blade is in constant contact
with Transfer Belt.
• After the power is turned ON and a predetermined number of copies are printed, the
Transfer Belt is turned backward for a predetermined period of time to remove residual
toner and paper dust wedged between the Cleaning Blade and Transfer Belt.
7-14.
Cleaning the 2nd Image Transfer Roller
• To remove residual toner from the surface of the 2nd Image Transfer Roller, a reverse
bias is output intermittently to the roller.
• The residual toner is moved to the surface of the Transfer Belt, and collected by the
Cleaning Blade.
• Cleaning is initiated when the Power Switch is turned ON or Front Door is opened/closed
or when jam or trouble returns occur.
2nd Image
Transfer Roller
Bias Intercept
Reverse Bias
Cleaning Blade
Cleaner Receive Roller
Transfer Belt
Driven Roller
4134M046AA
Bias Contact
Charge
Neutralizing Bias
M-39
4134M010AB