Minolta magicolor 7300 Service Manual page 120

FrameMaker Ver.6E (PC) magicolor 7300 MAINTENANCE
02.08.08
C4134u059AC
4134E035AA
<Other Information>
Left Right
C4134o273AA
Right
Left
C4134o274AA
4. Lower the two Fusing Misfeed Clearing Levers,
and then remove the shipping brackets.
5. Return the levers to their original position.
6. Close the Right Door.
7. Turn on the Power Switch.
• If the printer is not used (is not turned on) for more
than two weeks, lower the levers, and then attach
the shipping brackets to the Fuser Unit. Return the
levers to their original positions.
• If the shipping brackets were lost, lower the levers
to their lowest positions Before using the printer
again, return the levers to their original positions.
NOTE
• If the printer is used without the levers returned to
their original positions, decrease image fusing may
result.
E-21