Operator Call Message - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 Control PANEL/Panel Menu Operations
02.08.08
(4)

Operator Call Message

Message
MEDIA EMPTY • yy size paper not found in any
ADD yy
TRAYx EMPTY • yy size paper not found in
ADD yy
• yy size paper not found in
MANL EMPTY
ADD yy
• No trays installed. (Tray
ADJUST TRAYS
• Tray x is not installed. (Tray
AJUST TRAYx
MEDIA JAM • Paper jam in xx position
xx
COVER OPEN • xx door is open
CHECK xx
TONER EMPTY • toner x is empty
REPLACE x
PRINT UNIT END • Service life of print unit x is
REPLACE x
WASTE TONER FULL • Waste toner box is full.
REPLACE BOX
TONER MISSING • Toner cartridge x is not
CHECK x
P-UNIT MISSING • Print unit x is not installed.
CHECK x
FUSER MISSING • Fuser Unit is not installed.
CHECK UNIT
• Two-sided printing cannot be
NO MANUAL FEED
CHECK UNIT
• yy paper size specified by the
MEDIA SIZE ERR
ADD yy
• Paper size other than yy size
Description
tray. (Tray chain=ON)
Tray x. (Tray chain=OFF)
Manual Feed Tray. (Tray
chain=OFF)
chain=ON)
chain=OFF)
over.
installed.
performed because Manual
Feed Unit is not installed.
driver not found in any tray
(Tray chain=ON, Auto
Continue=NO)
specified by the driver is
loaded (Tray chain=ON, Auto
Continue=NO)
S-6
Action
• Load yy size paper in any
tray.
• Load yy size paper in Tray x.
• Load yy size paper in the
Manual Feed Tray.
• Install a tray.
• Install Tray x.
• Clear jammed paper.
• Close the xx door.
• Replace toner cartridge x.
• Replace print unit x.
• Replace waste toner box.
• Install toner cartridge x
• Install print unit x
• Install Fuser Unit.
• Install Manual Feed Unit.
• Load yy paper size in any
tray.