Table of Contents
Advertisement
FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
4134D135AA
4134D137AB
4134D136AB
4134D138AA
4134D139AA
13. Connect the Interface Connector.
14. Connect the Duplex Unit.
5. Secure the pulley onto Holder B.
6. Attach the shaft to Holder B.
7. Attach the end of the twisted coil spring to the
pulley.
8. Attach the collar to the twisted coil spring.
9. Wind the collar and one and a third turns clock-
wise.
10. Attach Holder C to the collar.
11. Wind the collar and Holder C one and two thirds
turn clockwise.
12. Attach Holder C using two screws.
D-47
Advertisement
Table of Contents
Troubleshooting
