Table of Contents
Advertisement
FrameMaker Ver.6E (PC) magicolor 7300 TROUBLESHOOTING
02.08.08
Fuser Unit
10 Fusing Entrance Guide
Plate is dirty or damaged.
11 Fusing Paper Separator
Fingers are dirty.
12 The problem has been
eliminated by checking up
to Step 11.
YES Clean.
Replacing the Fuser Unit.
YES Replacing the Fuser Unit.
NO
Change PU
Replacing the Transfer Belt Unit.
Replacing PH unit.
Replacing the Fuser Unit.
T-43
Advertisement
Table of Contents
Troubleshooting
