Minolta magicolor 7300 Service Manual page 97

FrameMaker Ver.6E (PC) magicolor 7300 MECHANICAL/ELECTRICAL
02.08.08
2
4657M516AA
4
2
4657M517AA
1 2
4
4330M501AA
2
1
6 4
4330M502AA
2. The paper is switched back in the paper exit sec-
tion.
3. At the same time, the 2nd sheet of paper is taken
up and fed in.
4. The image on page 4 of the original is printed on
the 2nd sheet of paper.
5. The 1st sheet of paper moves through the Duplex
Unit and is directly subject to the second copy
cycle without stopping.
6. The image on page 1 of the original is printed on
the 1st sheet of paper that is re-fed.
7. The second sheet of paper is switched back and
fed into the duplex unit.
8. At the same time, the 3rd sheet of paper is taken
up and fed in.
9. At the same time, the 1st sheet of paper is fed out
of the machine, the image on page 6 is printed on
the 3rd sheet of paper.
10. The 2nd sheet of paper stops in the Duplex Unit.
M-63