Remove The 2Nd Drawer Control Board - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
4134D129AA
(3)

Remove the 2nd Drawer Control Board

4134D103AA
4134D102AA
4134D104AA
4134D105AA
6. Remove eight screws, and then remove the Con-
troller Board.
1. Remove the Connector Cover on the back of the
main unit.
2. Remove the 2nd Drawer Rear Cover.
3. Unplug one Power Supply connector.
4. Remove the harness from the wire saddle.
5. Unplug one control connector.
6. Remove two screws, and the PWB Cover.
D-13