Minolta magicolor 7300 Service Manual page 113

FrameMaker Ver.6E (PC) magicolor 7300 MAINTENANCE
02.08.08
C4134o223AB
C4134u031AD
C4134u062AB
4134E011AB
4134E012AB
4. Open the alminum pack, and then remove the
Print Unit from the pack.
NOTE
• Hold the handle and knob on the Print Unit, as
shown below.
• Do not remove the protective tapes (2 locations)
until ready to install it into the main unit .
NOTE
• Never touch the Print Unit terminal.
5. Match the color labels (Y • M • C • K) to the labels
at the installation points on the main unit and
insert.
NOTE
• Do not insert a print unit that has different colored
labels than the labels on the main unit.
6. Grasp the knob on the print unit and gently insert
until it is firmly seated.
E-14