Reinstallation Procedures - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
<Reinstallation procedures>
NOTE
• When replacing the Control Board, make sure to remove the EEPROM from the old Con-
trol Board and remount it onto the new board.
1. Replace the EEPROM.
(New)
4131D059AB
2. Secure the Control Board with six screws.
3. Reinstall all connectors removed in Removal Procedure 10.
4134D150AB
(Old)
NOTE
• Ensure that the EEPROM is installed in the correct
direction.
4. Remove the six screws in the " " marked posi-
tions, and open the Controller Box.
D-10
4134D149AB