Removing The Wire Stopper - Minolta magicolor 7300 Service Manual

FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
(2)

Removing the Wire Stopper

Holder A
Twisted coil spring
Holder C
1. Remove the Duplex Unit.
D-26
4134D166AA
4134D098AA
Hook
Pulley
Collar
2. Remove three screws.
3. Remove Holder A.
4. Remove two screws, and Holder C.
5. Remove the twisted coil spring, and the collar.
NOTE
• Take care when removing the twisted coil spring,
as it may spring back and cause injury.
D-44
Holder B
4134D097AA