Minolta magicolor 7300 Service Manual page 151

FrameMaker Ver.6E (PC) magicolor 7300 ASSEMBLY/DISASSEMBLY
02.08.08
4134D069AA
4134D073AA
4134D100AA
4134D115AA
4134D068AA
4. Remove the harness from the wire saddle.
5. Unplug two connectors.
6. Remove two screws, and the PWB Cover.
7. Remove the harness from the wire saddle.
8. Unplug two connectors.
9. Remove two screws, and the PWB Cover.
10. Unplug all connectors on the Control Board.
11. Remove the PWB holder.
12. Remove two screws, and then remove the Con-
trol Board.
D-21