FrameMaker Ver.6E (PC) magicolor 7300 MAINTENANCE
02.08.08
4658D009AA
(3)
Cleaning the Paper Separator Roll
<1st Drawer>
4134E052AA
4658D006AA
<The 2nd Drawer and the Paper Take-up Unit (optional) >
4658D002AA
5. Snap off one C-clip and remove the Paper Take-
Up Roll.
1. Slide out the drawer.
2. Remove two screws and the Paper Separator
Roll mounting bracket assembly.
NOTE
• Hold the reinforcement plate with your hand as it
may come off when the screws are removed.
• When reinstalling the reinforcement plate, make
sure that it is dowelled into position.
3. Using a dry cloth, wipe the Paper Separator Roll
clean of dirt.
1. Slide out the drawer.
2. Remove two screws and the Paper Separator
Roll mounting bracket assembly.
E-6