Table of Contents
Advertisement
FrameMaker Ver.6E (PC) magicolor 7300 TROUBLESHOOTING
02.08.08
5.
OTHER PRECAUTIONS
5-1.
Emergency Stop Error
(1)
Door Open Error
Message
COVER OPEN
The Right Door Open Signal is continuously
CHECK SIDE
detected for more than a predetermined
DOOR
period of time.
COVER OPEN
The Front Door Open signal is continuously
CHECK FRONT
detected for more than a predetermined
DOOR
period of time.
COVER OPEN
The Duplex Cover Open signal is
CHECK DUP.
continuously detected for more than a
DOOR
predetermined period of time.
COVER OPEN
The 2nd Drawer Side cover Open Signal is
CHECK TRAY2
continuously detected for more than a
DOOR
predetermined period of time.
COVER OPEN
When the 3rd Drawer Side Cover Open
CHECK TRAY3
signal is continuously detected for more than
DOOR
a predetermined period of time 3
COVER OPEN
When the4thDrawer Side Cover Open signal
CHECK TRAY4
is continuously detected for more than a
DOOR
predetermined period of time.
(2)
Unit not mounted error
Message
When the system detects toner cartridge x
TONER MISSING
has not been installed after the Power supply
CHECK x
is turned ON and the cover is opened and
closed.
When the system detects no Fuser Unit
FUSING
mounted after the Power supply is turned
MISSING CHECK
ON and the cover is opened and closed.
UNIT
When the system detects printer unit x not
P-UNIT MISSING
installed after the Power supply is turned ON
CHECK x
and the cover is opened and closed.
Detection Timing
Detection Timing
T-40
Error Release
Conditions
Close the Right Door.
Close the Front Door.
Close the Duplex Cover.
Close the 2nd Drawer
Side Cover.
Close the 3rd Drawer
Side Cover.
Close the 4th Drawer
Side Cover.
Error Release
Conditions
After installing toner
cartridge x, close the
front door, and turn the
power ON again.
After mounting the
Fuser Unit, close the
right door and turn the
Power Supply ON.
After installing printer
unit x, close the front
door, and turn the power
ON again.
Advertisement
Table of Contents
Troubleshooting
