Other Precautions - Minolta Di200 Service Manual

5. Precautions for the Laser Beam (Only for Products Employing a Laser)
• Removing the cover marked with the following caution label could lead to possi-
ble exposure to the laser beam, resulting in eye damage or blindness. Be sure
to unplug the power cord before removing this cover.
• If removing this cover while the power is ON is unavoidable, be sure to wear
protective laser goggles that meet specifications.
• Make sure that no one enters the room when the machine is in this condition.
• When handling the laser unit, observe the "Precautions for Handling Laser
Equipment."
• When handling circuit boards, observe the "HANDLING of PWBs".
• The PC Drum is a very delicate component. Observe the precautions given in "HAN-
DLING OF THE PC DRUM" because mishandling may result in serious image problems.
• Note that replacement of a circuit board may call for readjustments or resetting of partic-
ular items, or software installation.
DANGER
Invisible laser radiation when open.
AVOID DIRECT
TO BEAM

Other Precautions

P-4
1167P001AA
EXPOSURE
0947-7127-01
1144D270AA