Operating Procedures; Monitor Control Function - Panasonic WJ-FS616C Operating Instructions Manual

Video multiplexer
Hide thumbs Also See for WJ-FS616C:
Table of Contents

Advertisement

OPERATING PROCEDURES

MONITOR CONTROL
FUNCTION
Before starting the following procedures, all system
components should be turned on.
Then set the LOCK switch to the OFF position.
Operating the Spot Monitor
The following operations are available on the Spot
Monitor.
Displaying the Camera Picture
1. Single Spot
1. Press the SPOT button. The LED (green) on the
button lights up.
SPOT
2. Press a CAMERA (1 - 16) button to display a
selected camera picture on the monitor screen.
The LED on the selected CAMERA button lights up.
ENTRANCE
2. Spot Sequence
1. Press the SPOT button. The LED (green) on the
button lights up.
2. Press the SEQUENCE button to activate the
sequence (SEQ1) programmed.
SEQUENCE
The LED on the SEQUENCE button lights up.
Note: Refer to the Sequence Setup on page 31 for
more details.
3. Press the SEQUENCE button to move one step for-
ward in the sequence.
4. To cancel the sequence, press the respective
CAMERA button again.
The selected camera picture is displayed in spot
mode.
Operating the Multiscreen
Monitor
The following operations are available on the Multi-
screen Monitor.
Note: We recommend to use the Single Spot when
displaying non-interlace pictures, for instance,
the Menu screen of the WJ-SX550, to prevent
picture disturbance.
Displaying the Camera Picture
1. Single Spot
1. Press the MULTISCREEN button. The LED (green)
on the button lights up.
2. Press the VCR/CAM button to CAM position (LED
off).
3. Press a CAMERA (1 - 16) button to display a
selected camera picture on the monitor screen.
The LED on the selected CAMERA button lights up.
2. Single Still
1. Repeat the step 1 - 3 described above for Single
Spot.
2. Press the STILL button to freeze the displayed pic-
ture.
STILL
The LED on the STILL button lights up, and the LED
on the pressed CAMERA button starts to blink.
The camera title and "STILL" (both blinking) alter-
nate in the display.
3. To cancel the still picture, press the STILL button
again.
The selected camera picture is displayed in spot
mode.
-38-
MULTI
SCREEN
VCR
CAM
STILL

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wj-fs616

Table of Contents