Major Operating Controls And Their Functions - Panasonic WJ-FS216 Service Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Panasonic
POWER
ON
OFF
16 15
CAMERA
IN
CAMERA
OUT
16 15
1. Power ON/OFF Switch (POWER ON/OFF)
This switch is used to turn the power of this unit on or
off. The POWER indicator lights when the power of this
unit is on.
Switch Protector (Standard Accessory)
To prevent that the power of the video multiplexer is
turned off accidentally, install the supplied switch
protector as shown below.
2. Alarm LED (ALARM)
This LED flashes while the alarm signal is received. It
lights in the following cases:
• When the ALARM/REMOTE connector receives the
alarm reset signal.
• When the alarm reset time specified for AUTO
RESET in MENU 1 OF 3 has elapsed (in multi-
screen mode).
To turn off the LED, press the ALARM RESET button.
3. Sequence/Alarm Reset Button
(SEQUENCE/ALARM RESET)
This button activates sequence mode when the MODE
SELECT/CAMERA SELECT switch is in CAMERA
SELECT position.
In alarm condition, this button serves as ALARM RESET
button regardless of the MODE SELECT/CAMERA
SELECT switch position.
ALARM ZOOM
1 2
SEQENCE MULTI SCREEN 9 10
ALARMRESET QUAD SHIFT
14 13 12 11 10 9
14 13 12 11 10 9
CAMERA/VTR
3 4 5 6 7 8
12 13 14 15 16
11
SET STILL ON
8 7
6 5 4
8 7 6 5 4 3
• Sequence Button
This button is used to activate the sequence mode.
In this mode, a series of pictures is displayed in succes-
sion on the monitor screen in the order and for the dura-
tion or dwell time you set.
• Alarm Reset Button
This button is used to cancel an active alarm.
Press while the alarm function is activated to reset the
alarm and the unit to the condition before the alarm func-
tion was activated.
4. Zoom/Multiscreen/Quad Shift Button (ZOOM/
MULTISCREEN/QUAD SHIFT)
This button has three functions. The functions change
according to the position of the MODE SELECT/CAM-
ERA SELECT switch as follows:
When the MODE SELECT/CAMERA SELECT switch is
in CAMERA SELECT position, this button works as the
MULTISCREEN or the QUAD SHIFT button.
When the MODE SELECT/CAMERA SELECT switch is
in MODE SELECT position, this button works as the
ZOOM button.
• MULTISCREEN button
• QUAD SHIFT button
• ZOOM button
1
MODE
MENU
SELECT
CAMERA
SELECT
Digital Video MultiplexerWJ-FS
3 2 1
PLAY IN REC OUT MONITOR OUT
2 1
ALARM/REMOTE
Pressing this button changes the picture (camera
picture or playback picture from the time lapse VTR)
to four (quad), 3x3 or 4x4 (multi) pictures.
Pressing this button when monitoring a quad picture
shifts to another of up to four quad pictures.
Pressing this button zooms up a specified portion of
the monitored picture.
216
CAMERA
SW IN
SIGNAL
GND