Table of Contents
Advertisement
MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS
Panasonic
ALARM
POWER
ON
OFF
16
15
14
CAMERA
IN
CAMERA
OUT
16
15
14
13
1. Power ON/OFF Switch (POWER ON/OFF)
This switch is used to turn the power of this unit on
or off. The POWER indicator lights when the power
of this unit is on.
Switch Protector (Standard Accessory)
To prevent that the power of the video multi-
plexer is turned off accidentally, install the sup-
plied switch protector as shown below.
2. Alarm LED (ALARM)
This LED flashes while the alarm signal is received.
It lights in the following cases:
• When the ALARM/REMOTE connector receives
the alarm reset signal.
• When the alarm reset time specified for AUTO
RESET in MENU 1 OF 3 has elapsed (in multi-
screen mode).
To turn off the LED, press the ALARM RESET but-
ton.
3. Sequence/Alarm Reset Button
(SEQUENCE/ALARM RESET)
This button activates sequence mode when the
MODE SELECT/CAMERA SELECT switch is in
CAMERA SELECT position.
In alarm condition, this button serves as ALARM
RESET
button
regardless
SELECT/CAMERA SELECT switch position.
ZOOM
1
2
3
4
SEQENCE
MULTI SCREEN
9
10
12
11
ALARMRESET
QUAD SHIFT
13
12
11
10
9
8
7
12
11
10
9
8
7
of
the
MODE
CAMERA/VTR
MODE
SELECT
5
6
7
8
13
14
15
16
CAMERA
SELECT
SET
STILL ON
6
5
4
3
2
1
6
5
4
3
2
1
• Sequence Button
This button is used to activate the sequence mode.
In this mode, a series of pictures is displayed in
succession on the monitor screen in the order and
for the duration or dwell time you set.
• Alarm Reset Button
This button is used to cancel an active alarm.
Press while the alarm function is activated to reset
the alarm and the unit to the condition before the
alarm function was activated.
4. Zoom/Multiscreen/Quad Shift Button (ZOOM/
MULTISCREEN/QUAD SHIFT)
This button has three functions. The functions
change according to the position of the MODE
SELECT/CAMERA SELECT switch as follows:
When the MODE SELECT/CAMERA SELECT switch
is in CAMERA SELECT position, this button works
as the MULTISCREEN or the QUAD SHIFT button.
When the MODE SELECT/CAMERA SELECT switch
is in MODE SELECT position, this button works as
the ZOOM button.
• MULTISCREEN button
Pressing this button changes the picture (cam-
era picture or playback picture from the time
lapse VTR) to four (quad), 3x3 or 4x4 (multi)
pictures.
• QUAD SHIFT button
Pressing this button when monitoring a quad
picture shifts to another of up to four quad pic-
tures. See page 17 for details.
• ZOOM button
Pressing this button zooms up a specified por-
tion of the monitored picture.
See page 19 or 21 for details.
-3-
MENU
216
Digital Video MultiplexerWJ-FS
CAMERA
SW IN
PLAY IN
REC OUT
MONITOR OUT
SIGNAL
ALARM/REMOTE
GND
Advertisement
Table of Contents
