Operating Procedures; Monitoring The Camera Picture - Panasonic WJ-FS316 Operating Instructions Manual

OPERATING PROCEDURES

Monitoring the Camera Picture

SPOT OUT
1. Spot Picture
1. Press a SPOT/MULTISCREEN button so that the LED
of SPOT/MULTISCREEN button lights up.
2. Press a CAMERA SELECT button to display a camera
picture on the monitor screen.
The LED on the pressed CAMERA SELECT button
lights up.
2. Spot Sequence
1. Press the SEQ button.
A sequence of single pictures is displayed in the order
and dwell time selected for the MLT/SPT SEQ SETUP
parameter in the SEQUENCE SETUP menu.
Note: Refer to the Sequence Setup on page 15 for
more details.
30
SPOT
MULTISCREEN
ENTRANCE
SEQ
Example of spot camera picture sequence
Camera 3 Picture
Camera 6 Picture
2. To cancel a sequence, press the respective CAMERA
SELECT button.
The selected camera picture appears in spot mode.