Camera Upload; All Reset - Panasonic WJ-FS616C Operating Instructions Manual

Camera Upload

This item lets you upload camera setup data from
the Video Multiplexer's memory to a camera.
1. Move the cursor to the CAM UPLOAD parameter
in the SETUP MENU.
2. Select YES by pressing the LEFT or RIGHT but-
ton, then press the SET button.
The CAM UPLOAD table shown below appears
on the monitor screen.
CAM UPLOAD
UPLOAD
CAM 1 2 3 4
DATA O+ - O+ -
CAM 9 10 11 12 13 14 15 16
DATA - - - -
O:RESULT OK +:DATA EXISTENCE
N:RESULT NG -:DATA NOTHING
CAUTION:ALL ALARM INPUTS
HAVE BEEN DISABLED.
3. Select the channel you want to edit by pressing
the LEFT or RIGHT button.
1CH - 16CH: Enables data uploading to a
selected camera.
ALL: Enables data uploading to all cameras.
Note: Channel numbers can also be input
directly with the Camera Number Buttons.
4. Move the cursor to "NO" by pressing the UP or
DOWN button.
5. Select "YES" by pressing the LEFT or RIGHT
button.
6. Press the SET button to begin the load. "NOW
LOADING" appears on the table.
To cancel loading, press the SETUP/ESC but-
ton.
7. When loading is finished, the result is displayed
for each channel.
8. Press the SETUP/ESC button, then system will
restart.
Note: Alarm is disabled while this menu is dis-
played.
1CH NO
5 6 7 8
- N- + -
- - - -

All Reset

This item lets you restore the factory settings without
having to go through each individual menu.
1. Move the cursor to ALL RESET SELECT on the
SETUP MENU, then press the SET button. The
ALL RESET SELECT menu shown below
appears on the monitor screen.
ALL-RESET
CAUTION:ALL ALARM INPUTS
2. Select "YES" by pressing the LEFT or RIGHT
button.
3. Press the SET button to execute the All Reset
function.
4. First "NOW RESETTING" appears, then "RESET
COMPLETED".
5. Press the SETUP/ESC button to return to the
SETUP MENU.
Note: Alarm is disabled while the ALL RESET
menu is displayed.
-37-
ALL RESET SELECT
NO
HAVE BEEN DISABLED.