Panasonic WJ-FS616C Operating Instructions Manual page 59

(3) Cursor Control
Item
Cursor Movement
Select Parameter
*2 The parameter valid on the main unit setup menu is:
mm=UU, DD, RR, LL, BB, ES, FF, IC, DC
The parameter valid for zoom position move during electronic zooming is:
mm=UU, DD, RR, LL, UR, UL, DR, DL
(4) Status Inquiry
Item
Status Inquiry
Transmission
Command (ASCII)
DCR : mm
Transmission
Command (ASCII)
QOP Table below (19 kinds)
Response
Command (ASCII)
DCR
Response
Command (ASCII)
-57-
Parameter (ASCII)
mm=UU Move Upward
mm=DD Move Downward
mm=RR Move to Right
mm=LL Move to Left
mm=BB Move to lower layer
mm=ES Move to upper layer
Item decision (partial)
mm=IC Select parameter (+)
mm=DC Select parameter (–)
mm=FF Select page
mm=UR Move to Upper-Right
mm=UL Move to Upper-Left
mm=DR Move to Lower-Right
mm=DL Move to Lower-Left
Parameter (ASCII)
None
*2