System Setup - Panasonic WJ-FS616C Operating Instructions Manual

System Setup

WJ-FS616 SETUP MENU
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
REC/MULTI2
SYSTEM SETUP *
CAM DOWNLOAD
CAM UPLOAD
ALL RESET SELECT *
Move the cursor to SYSTEM SETUP on the SETUP
MENU, then press the SET button. The SYSTEM
SETUP menu appears on the monitor screen as
shown below.
Press the FUNCTION button to display the next
page. Press this button again to return to the previ-
ous page.
SYSTEM SETUP
CLOCK SETUP
CLOCK POSITION *
TITLE SETUP *
TITLE POSITION *
SEQUENCE SETUP SEQ1 *
SEQ TIMING-MLT INT(TIME-ADJ)
SEQ TIMING-SPT INT
LOCK MODE
SYSTEM SETUP
CABLE COMP/VD2/DATA SETUP *
ALM TERMINAL SETUP *
PLAYBACK MODE
DATA MODE
RS-232C MODE
COM PORT SETUP *
VCR IN SELECT
DAISY MODE
UNIT ADDR.SET
1. Clock Setup
This item lets you set the current time and date.
1. Move the cursor to CLOCK SETUP, then press
the SET button to move the cursor to the editing
area.
2. Move the cursor to the area you want to edit by
pressing the UP or DOWN button, then select
the month or number by pressing the LEFT or
RIGHT button.
3. After finishing the setting, press the SETUP/
ESC button to move the cursor to CLOCK
SETUP.
Note: The date and time are updated when the
SETUP/ESC button is pressed.
MULTI2 OUTPUT *
NO
NO
1 OF 2
JAN 1.97 0:00
ALL
2 OF 2
FIELD
CU550A
VCR
VIDEO
OFF
1
2. Clock Display Position
This item lets you select the position where the
clock will be displayed on the monitor screen.
1. Move the cursor to CLOCK POSITION, then
press the SET button. The position setting menu
appears on the monitor screen as show below.
DEC11.96 12:00:00
2. Move the clock position by pressing the
Direction Arrow Buttons.
Note: In the Multiscreen display with display of
the Record out signals, the clock display is
shifted one line from the preset position if
the Camera Title and the Clock are preset
to the same position.
3. Press the SETUP/ESC button to execute the
selection and return to the previous SYSTEM
SETUP menu.
3. Camera Title Setup
This item lets you edit the camera title to be dis-
played on the monitor screen.
Up to 8 alphanumeric characters can be displayed
on the monitor.
1. Move the cursor to TITLE SETUP, then press the
SET button.
The TITLE SETUP menu appears on the monitor
screen as shown below.
1CH 1-------
2CH 2-------
3CH 3-------
4CH 4-------
5CH 5-------
6CH 6-------
7CH 7-------
8CH 8-------
9CH 9-------
10CH 10------
11CH 11------
12CH 12------
13CH 13------
14CH 14------
15CH 15------
16CH 16------
-30-
CAMTITLE
TITLE SETUP 1 OF 2
0123456789
ABCDEFGHIJK
LMNOPQRSTUV
WXYZ
abcdefghijk
imnopqrstuv
wxyz
=?'"#&()*
' ¤
E
+,-./:;
@
TITLE SETUP 2 OF 2
0123456789
ABCDEFGHIJK
LMNOPQRSTUV
WXYZ
abcdefghijk
imnopqrstuv
wxyz
=?'"#&()*
' ¤
E
+,-./:;
@