Table of Contents
Advertisement
SETUP MENU
The Setup Menu provides a way for controlling func-
tions not available through direct input.
Displaying the SETUP MENU
1. Confirm the camera and peripherals are connected
correctly and securely.
2. Turn on the power switches of all system compo-
nents.
3. Press the SETUP/ESC button for 2 seconds.
The SETUP MENU appears on the Spot and
Multiscreen Monitors as shown below.
WJ-FS616 SETUP MENU
ALARM SETUP *
MULTI OUTPUT SETUP *
SPOT OUTPUT SETUP *
SET UP/ESC
REC/MULTI2
SYSTEM SETUP *
CAM DOWNLOAD
CAM UPLOAD
ALL RESET SELECT *
REC OUTPUT *
NO
NO
-21-
• The following buttons are valid in the SETUP menu:
UP: Moves the cursor upward.
DOWN: Moves the cursor downward.
LEFT: Moves the cursor to the left, or selects the
mode or parameter.
RIGHT: Moves the cursor to the right, or selects the
mode or parameter.
SET: Executes the selections and displays a sub-
menu for an item with the ( ) mark.
STILL ( – ): Selects the mode or parameter.
EL-ZOOM ( + ): Selects the mode or parameter.
FUNCTION: Selects the next page.
FUNCTION
LEFT
STILL
EL-ZOOM
• Press the SETUP/ESC button to execute the cur-
rently highlighted setting and return to the previous
menu in the SETUP MENU.
• To finalize the setting and return to normal viewing,
press the SETUP/ESC button for 2 seconds while
the SETUP MENU is displayed.
Note: If alarm is activated during the setup opera-
tion, the SETUP menu disappears and the dis-
play returns to the normal picture. Any settings
previously made take effect, even if the SET
UP/ESC button was not pressed.
UP
HOME/SET
RIGHT
DOWN
Advertisement
Table of Contents
