Schwinn 270 Service Manual page 65

NOTICE: It is necessary to remove the Shrouds for this procedure. Refer to the "Replace the Shrouds" procedure.
! Disconnect all power to the machine before you service it.
Note: Your machine may not match the image. For reference only.
1. Carefully remove the Left Shroud. Refer to the "Replace the
Shrouds" procedure in this manual.
2. Carefully disconnect the the Power Inlet cable (A) in the
Shroud from the wiring harness (B) on the motor.
Upright bike
A
Recumbent bike
B
65
B
A