Schwinn 270 Service Manual page 55

NOTICE: It is necessary to remove the Shrouds for this procedure. Refer to the "Replace the Shrouds" procedure.
It is necessary to adjust the Drive Belt tension at the end of this procedure. Refer to the "Belt Tension Adjustment" procedure
!
Disconnect all power to the machine before you service it.
Note: Your machine may not match the image. For reference only.
1. Carefully remove the Shrouds. Refer to the "Replace the
Shrouds" procedure in this manual.
2. Slowly turn the Drive Pulley (A) backward and carefully ease
the Drive Belt (B) off the Drive Pulley to the outside.
Be sure to keep fingers clear of all pinch hazards as
you turn the Drive Pulley.
B
55
A
C
E
B