Schwinn 270 Service Manual page 41

! Disconnect all power to the machine before you service it.
Note: Your machine may not match the image. For reference only.
1. Remove screws that attach Console to the Mast. Carefully lift
the Console off the Mast.
2. Disconnect the Data Cable and Heart Rate (HR) Cable from the
back of the Console. Set the Console and screws safely aside for
reassembly.
Note: Do not let the cables fall down inside the Mast.
3. Remove the Mast Gasket. Set it safely aside for reassembly.
4. Bend the edges of the Top Shroud to disengage the inside tabs
from the Main Assembly, and slide the Top Shroud up the Mast.
5. Remove the hardware (indicated) from the Mast. Gently pull
the Mast out and disconnect the cables. Set the hardware safely
aside for reassembly.
NOTICE: Do not cut or pinch the cables. This step may require
two people.
Note: Do not let the cables fall down inside the Frame.
41