Schwinn 270 Service Manual page 22

NOTICE: This document provides instructions for the replacement of the Pedals on the Schwinn
Journey 1.0/1.5 Upright Bikes and Journey 2.0/2.5 Recumbent Bikes.
If you need assistance, please contact Customer Service (if purchased in US/Canada) or your local distributor (if purchased outside
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and
understand all Warnings on this machine.
Nautilus, Inc., (800) NAUTILUS / (800) 628-8458, www.NautilusInc.com - Customer Service: North America (800) 605-3369, csnls@nautilus.com | outside U.S. www.nautilusinternational.com | © 2013 Nautilus, Inc. |
Schwinn is a trademark licensed to Nautilus, Inc., which is registered or otherwise protected by common law in the United States and other countries. |
Important Safety Instructions - Before servicing or using this equipment, obey the following warnings:
This icon means a potentially hazardous situation which, if not avoided, could result in death or serious injury. Read and understand all
Warnings on this machine.
Disconnect all power to the machine before you service it.
• Keep bystanders and children away from the product being serviced at all times.
• Some components of the equipment can be heavy or awkward. Enlist the service of a second person when you do maintenance steps involving these
components. Do not try to do heavy or awkward steps on your own.
• If replacement parts are necessary, use only genuine replacement parts and hardware supplied by Nautilus. Failure to use genuine replacement parts
can cause a risk to users, keep the machine from operating correctly and void the warranty.
• Be sure that all warning stickers and instructional placards applied to the product stay present and in good condition when doing maintenance or
replacing components. If at any time the Warning labels become loose, unreadable or dislodged, replace the labels. If purchased in US/Canada, contact
Customer Service for replacement labels. If purchased outside US/Canada, contact your local distributor for them.
• Do not try to change the design or functionality of the machine being serviced as this can adversely affect user safety.
performance.
SAVE THESE INSTRUCTIONS.
•
Tools Required (not included)
Pedal wrench or 15mm open end
wrench
Replace the Pedals on the Schwinn
TM
Journey 1.0/1.5/2.0/2.5 Bikes
™
130/170/230/270 and
™
130/170 Upright Bikes, 230/270 Recumbent Bikes,
ORIGINAL DOCUMENT - ENGLISH VERSION ONLY
22
Replacement Procedure
Skill Level: I
8006488.030123.F