Schwinn 270 Service Manual page 44

Disconnect all power to the machine before you service it.
Your machine may not match the image. For reference only.
1. Remove the Seat Adjustment Handle from the seat slider
assembly. Set the Seat Adjustment Handle safely aside for
reassembly.
2.
Carefully remove the Top Cap from the seat slider
bracket, and disconnect the Heart Rate Cables.
3. Using a #2 Phillips Screwdriver, loosen and remove
the hardware that attaches the padded Seat Bottom to the
Seat Frame Assembly. Set the hardware safely aside for
reassembly.
4.
Remove the Seat Bottom from the Seat Frame Assembly
and set it safely aside.
5.
hardware that attaches the Seat Back to the Seat Frame
assembly, and remove the Seat Back. Set the Seat Back and
hardware safely aside.
NOTICE: This step may require two people.
44