Schwinn 270 Service Manual page 38

Disconnect all power to the machine before you service it.
Note: Your machine may not match the image. For reference only.
1.
Remove screws that attach Console to the Mast.
2. Disconnect the Data Cable and Heart Rate (HR) Cable
from the back of the Console. Set the Console and screws
safely aside for reassembly.
Note: Do not let the cables fall down inside the Mast or
Frame.
3.
reassembly.
4.
Bend the edges of the Top Shroud to disengage the
inside tabs from the Main Assembly, and slide the Top
Shroud up the Mast.
5. Remove the hardware (indicated) from the Mast.
hardware safely aside for reassembly.
NOTICE: Do not cut or pinch the cables. This step may
require two people.
Note: Do not let the cables fall down inside the Frame.
38