Schwinn 270 Service Manual page 32

5. Loosen and remove the Pedals. Set them safely aside for
reassembly.
Note: The Left Pedal is reverse-threaded.
Orientation is based from a seated position on the bike.
The Left Pedal has an "L", the Right Pedal an "R".
6. Bend the edges of the Top Shroud to disengage the inside tabs
from the Main Assembly, and slide the Mast Gasket and Top Shroud
up the Mast.
7. Remove the hardware (indicated) from the Mast. Gently pull
the Mast out and disconnect the cables. Set the hardware, Mast
and Console, and Top Shroud safely aside for reassembly.
NOTICE: Do not cut or pinch the cables. This step may require
two people.
Note: Do not let the cables fall down inside the Frame.
(R)
32
(L)