Schwinn 270 Service Manual page 47

13. Carefully disconnect the HR cables in the Seat Rail
Assembly and the Frame. Carefully remove the Seat Rail
Assembly from the Frame and set it safely aside.
NOTICE: Do not cut or pinch any cables.This step may
require two people.
14. Installation is the reverse procedure.
NOTICE: Be sure not to cut or pinch any cables.Hand
Note: Self-tapping screws attach the Shrouds to the
Frame.
NOTICE:
it. Be sure the cables are tucked inside the Top
Cap.
15. Final Inspection
Inspect your machine to ensure that all hardware is tight and
components are properly assembled.
Do not use until the machine has been fully
assembled and inspected for correct
47