Update The Machine Type And Serial; Number - Lenovo ThinkSystem ST250 V2 Maintenance Manual

Figure 120. Tightening the screws to secure the system board
After this task is completed
1. Install any components that you removed from the failing system board. See the related topics in
Chapter 4 "Hardware replacement procedures" on page 85.
2. Complete the parts replacement. See "Complete the parts replacement" on page 217.
3. Update the machine type and serial number with new vital product data (VPD). Use the Lenovo XClarity
Provisioning Manager to update the machine type and serial number. See "Update the machine type
and serial number" on page 209.
4. Enable TPM. See "Enable TPM" on page 211
5. Optionally, enable Secure Boot. See "Enable UEFI Secure Boot" on page 213.
Update the machine type and serial number
After the system board is replaced by trained service technicians, the machine type and serial number must
be updated.
There are two methods available to update the machine type and serial number:
• From Lenovo XClarity Provisioning Manager
To update the machine type and serial number from Lenovo XClarity Provisioning Manager:
1. Start the server and press F1 to display the Lenovo XClarity Provisioning Manager interface.
2. If the power-on Administrator password is required, enter the password.
3. From the System Summary page, click Update VPD.
.
Chapter 4 Hardware replacement procedures
209