Figure 80. Opening retaining clips
Step 4.
Remove the memory module.
a.
Make sure that the retaining clips are in the fully open position.
b.
Pull the memory module out of the slot with both hands.
Figure 81. Removing a memory module
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Memory module installation rules and orders
Memory modules must be installed in a specific order based on the memory configuration of the server.
The following illustration shows the location of the memory module slots on the system board.
.
Chapter 4
Hardware replacement procedures
149