Install The M.2 Boot Adapter - Lenovo ThinkSystem ST250 V2 Maintenance Manual

Figure 69. Disconnecting the power and signal cables
Step 4. Remove the M.2 boot adapter.
a. Remove the screw that secures the M.2 boot adapter to the PCIe adapter.
b. Loosen the captive screw on the M.2 boot adapter.
c. Slightly slide the M.2 boot adapter as illustrated and carefully separate it from the PCIe
adapter.
Figure 70. Removing the M.2 boot adapter
After this task is completed
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Install the M.2 boot adapter

Follow instructions in this section to install the M.2 boot adapter.
About this task
To avoid potential danger, read and follow the following safety statements.
.
Chapter 4 Hardware replacement procedures
139