Lenovo ThinkSystem ST250 V2 Maintenance Manual page 150
Hide thumbs
Also See for ThinkSystem ST250 V2:
- Quick start (2 pages) ,
- Setup manual (140 pages) ,
- Reference (200 pages)
Table of Contents
Advertisement
• S002
CAUTION:
The power-control button on the device and the power switch on the power supply do not turn off
the electrical current supplied to the device. The device also might have more than one power cord.
To remove all electrical current from the device, ensure that all power cords are disconnected from
the power source.
Attention:
• Read the "Installation guidelines" on page 85 to ensure that you work safely.
• Touch the static-protective package that contains the component to any unpainted metal surface on the
server; then, remove it from the package and place it on a static-protective surface.
Watch the procedure
A video of this procedure is available at YouTube:
DoEcxrm2zKNpaKOdZ3f8Qc
Procedure
Step 1.
Remove the screw on the back of the PCIe adapter.
Figure 71. Removing the screw on the back of the PCIe adapter
Step 2.
Secure the M.2 boot adapter to the PCIe adapter.
a.
Align the M.2 boot adapter with the T-head pin on the PCIe adapter as illustrated, and slide
it into place.
b.
Tighten the captive screw on the M.2 boot adapter.
c.
Tighten the screw from Step 1 to secure the M.2 boot adapter to the PCIe adapter.
ThinkSystem ST250 V2 Maintenance Manual
140
https://youtube.com/playlist?list=PLYV5R7hVcs-
.
Advertisement
Table of Contents
