Front Door Replacement; Remove The Front Door - Lenovo ThinkSystem ST250 V2 Maintenance Manual

Watch the procedure
A video of this procedure is available at YouTube:
DoEcxrm2zKNpaKOdZ3f8Qc
Procedure
Step 1. Install the front bezel.
a. Align the three plastic tabs on the right side of the front bezel with the corresponding holes
on the chassis.
b. Pivot the front bezel and front door inward until the front bezel snaps into place on the left
side.
Figure 59. Installing the front bezel
After this task is completed
Complete the parts replacement. See "Complete the parts replacement" on page 217.

Front door replacement

Follow instructions in this section to remove and install the front door.
Note: This section applies only to server models that have a front door installed.

Remove the front door

Follow instructions in this section to remove the front door.
About this task
To avoid potential danger, read and follow the following safety statements.
• S033
ThinkSystem ST250 V2 Maintenance Manual
124
https://youtube.com/playlist?list=PLYV5R7hVcs-
.