Chapter 8
M1/CS 1000 switch connectivity and the
MPB96
In this chapter
"M1/CS 1000 switch connectivity" (page 95)
"DSP numbering and location" (page 95)
M1/CS 1000 switch connectivity
There is only one valid configuration for MPB96 board withM1/CS 1000
switch connectivity. The following table shows the configuration.
Table 18
MPB96 with M1/CS 1000 switch
MPB96 boards
1
Taking safety precautions
Before you make any changes to the server hardware, follow these safety
precautions:
•
•
•
•
DSP numbering and location
DSPs are the built-in voice processing components on MPB boards. DSPs
are numbered to distinguish them in CallPilot maintenance programs, such
as the Maintenance page in CallPilot Manager. Each DSP supports up to
eight multimedia channels.
Copyright © 2007, Nortel Networks
.
Slot number
1
Respect appropriate electrostatic discharge (ESD) rules.
Power down the system.
Do not drop and leave screws inside the server.
Do not drop hard objects (such as screwdrivers) inside the server, as
this can damage the server.
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
MPU
Max. Channels
96
96
95