102 Chapter 9 Maintaining the BIOS and system board firmware
The SSU logs can only hold 2000 events and display a warning message
when full. You must clear the logs to turn off the warning message. For
more details, see
Even if your system is not operational, you can save the SSU logs to an
optional USB media drive. Your support representative can use the logs to
diagnose hardware faults. For more details, see
USB media drive" (page
To view SSU logs
Step
1
2
3
4
5
6
7
To clear SSU logs
Step
1
2
Copyright © 2007, Nortel Networks
.
"To clear SSU logs" (page
103).
Action
Boot from the CallPilot Image DVD and display the Nortel CallPilot
Image Menu that lists the utilities. For more details, see
the Nortel CallPilot Image Menu" (page
Enter 4 to run the 600r system utility and SEL viewer from the Nortel
CallPilot Image Menu.
Confirm that you want to run the utility by entering Y.
Result: The Intel GUI screen appears.
Note: The Intel GUI is not a Windows-based screen.
To view the hardware SSU logs, select System Event Log (SEL)
from the Available Tasks menu.
Result: The SEL Viewer screen displays all the SSU logs.
Use the arrow keys to scroll through the logs. The details of the
currently highlighted event display on the bottom of the screen.
After you are finished viewing events, select File → Exit from the
menu bar.
Result: The Intel GUI appears.
Click Exit to close the GUI.
Action
Display the SEL Viewer. For details, see
102).
Select SEL → Clear SEL from the menu bar.
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
102).
"To save SSU logs to a
98).
—End—
"To view SSU logs" (page
"To display