To Replace The Mpb96 Card; Nortel Callpilot; 600R Server Maintenance And Diagnostics; Nn44200-703 01.04 Standard - Nortel CallPilot User Manual

•

To replace the MPB96 card

Step
1
2
3
4
5
6
7
Copyright © 2007, Nortel Networks
.
Electrostatic Discharge (ESD) grounding strap
Action
Power down the server, unplug all peripheral devices and Ethernet
cables, unplug the DS30X cable, and disconnect the AC power.
Attach the ESD strap to your wrist and attach the other end to a
known grounded connection.
Remove the server cover. For instructions, see
replacing the server cover" (page
Loosen the captive screw that holds the PCI riser card assembly
to the rear of the platform. For more details, see A in
"Removing riser from chassis" (page
4. Pull up on the riser to remove the riser card assembly from the
chassis. For more details, see B in
chassis" (page 87).
Figure 24
Removing riser from chassis
Insert the MPB96 card into the slot on the riser card.
Firmly press the riser card straight down over the MPB96 slot until
the card is seated in the server board slot. For details, see B,
24 "Removing riser from chassis" (page

Nortel CallPilot

600r Server Maintenance and Diagnostics

NN44200-703 01.04 Standard

5.0 25 April 2007
Replacing the MPB96 card 87
"Removing and
77).
Figure 24
87).
Figure 24 "Removing riser from
87).
Figure