Nortel CallPilot User Manual page 14

14 Chapter 2 Outlining maintenance and diagnostics activities
Figure 2
Front panel controls and LEDs
Table 1
600r Hardware Faults
Lab
el
A
B
C
D
E
F
G
Rear panel controls and features
The following diagram shows the back panel controls and features of
the 600r. The AC power supply bank is on the right (E). The Peripheral
Component Interconnect (PCI) card bracket is in the middle of the back
panel while the connectors and ports are along the bottom and left side.
Copyright © 2007, Nortel Networks
.
Note: The faults described in the following table are hardware faults and
are independent of CallPilot application faults.
Control or feature
Power button
Reset button
Critical alarm LED
Major fault LED
Minor fault LED
Power LED
Disk 0 - activity (green) fault
(amber)
Note: Nortel provides only AC power supply. The server works with a
DC-to-AC converter, however, you must ensure the converter meets the
AC requirements specified on the label of the power supply cover. To
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Lab Control or feature
el
M NMI button (not used)
L ID button
K System ID LED (white)
J Network Interface Card (NIC)
activity LED (green)
I Main power LED (green)
H not used