Maintenance And Diagnostics Overview - Nortel CallPilot User Manual

Figure 3
Rear panel controls and features
Label
A
B
C
D
E
F
* Used with DC server input power supplies. This option is not available and

Maintenance and diagnostics overview

When you purchase your CallPilot server, the Windows operating system
and CallPilot server software are already installed on your system.
The maintenance and diagnostic activities discussed in this guide are
divided into two groups of activities:
•
•
Copyright © 2007, Nortel Networks
.
access the power supply cover, remove the server cover. For more
information about how to remove the server cover, see
replacing the server cover" (page
Control or feature
USB 0, USB 1, USB 2
(labelled 0, 1, 2 on server,
from the bottom up.)
PS/2 mouse
SCSI port
PCI card bracket
(full-height) for MPB96
Power supply
AC power input
not supported by Nortel.
troubleshooting and diagnostics (identifying the cause of system
problems and resolving them)
performing hardware maintenance
Nortel CallPilot
600r Server Maintenance and Diagnostics
NN44200-703 01.04 Standard
5.0 25 April 2007
Maintenance and diagnostics overview 15
77).
Lab
Control or feature
el
G Ground studs *
H RJ45 NIC 2 Embedded
Local Area Network (ELAN)
connector for the ELAN
subnet (engraved 2 on server)
I RJ45 NIC 1 Customer
Local Area Network (CLAN)
connector for Nortel server
subnet (engraved 1 on server)
J Video connector
K COM1 DB-9 serial port
L PS/2 keyboard connector
"Removing and