4.4.11
Modbus
This page provides Modbus setting as shown in
Object
• Enable
• Serial device
• Baudrate
• Databit
• Parity
• Stopbits
• TCP Slave Port
Figure
4-4-27.
Figure 4-4-27: Modbus
Description
Enable/disable Modbus function.
The industrial device server supports three interfaces.
The rate of data transmission to and from the attached serial device.
Indicates the number of the bits in a transmitted data package.
This parameter controls the error checking mode.
The stop bit follows the data and parity bits in serial communication.
The data service center's listening port.
- 61 -
Industrial LoRaWAN Gateway
LCG-300 series