Fault Alarm - Planet Networking & Communication LCG-300 Series User Manual

4.4.9

Fault Alarm

This page provides fault alarm setting as shown in
Object
• Enable
• Record
• Event
• Power Alarm
• Port Alarm
Figure 4-4-25.
Figure 4-4-25: Fault Alarm
Description
Controls whether Fault Alarm is enabled.
Controls whether Record is sending System log or SMS.
Detects there is Port Failure or Power Failure, or both.
Detects PWR1 or PWR2 is at fault, or both.
Detects which Port or all is or are at fault.
- 58 -
Industrial LoRaWAN Gateway
LCG-300 series