Planet Networking & Communication LCG-300 Series User Manual page 34

1. This utility shows all necessary information from the devices, such as MAC address, device name,
firmware version, and device IP subnet address. It can also assign new password, IP subnet
address and description to the devices.
2. After setup is completed, press the "Update Device", "Update Multi" or "Update All" button to take
effect. The functions of the 3 buttons above are shown below:

Update Device: use current setting on one single device.
 Update Multi: use current setting on choose multi-devices.

Update All: use current setting on whole devices in the list.
The same functions mentioned above also can be found in "Option" tools bar.
3. To click the "Control Packet Force Broadcast" function, it allows you to assign a new setting
value to the device under a different IP subnet address.
4. Press the "Connect to Device" button and the Web login screen
Press the "Exit" button to shut down the Planet Smart Discovery Utility.
Industrial LoRaWAN Gateway
appears.
- 34 -
LCG-300 series