Planet Networking & Communication LCG-300 Series User Manual page 42

Step 3: Priority Interface
The cellular VPN Security Router supports two access modes on the WAN side shown below:
Object
WAN Priority
Step 4: WAN Interface
The LoRaWAN Gateway supports two access modes on the WAN side shown in below
(LCG-300-NR Only)
Figure: Setup Priority Configuration
 Auto: WAN Ethernet is first priority and second priority is NR/LTE. The default
is Auto.
LTE/NR Only: The priority is only LTE/NR

ETH Only: The priority is only Ethernet.

LTE/NR First: LTE/NR is first priority and second priority is Ethernet

Figure 4-4-5: Setup Wizard – WAN 1 Configuration
- 42 -
Industrial LoRaWAN Gateway
Description
LCG-300 series