Planet Networking & Communication LCG-300 Series User Manual page 66

Object
WAN Access Type
WAN IP, whether obtained automatically or specified manually, should NOT be on
the same IP net segment as the LAN IP; otherwise, the LoRaWAN Gateway will not
work properly. In case of emergency, press the hardware-based "Reset" button.
Please select the corresponding WAN Access Type for the Internet,
and fill out the correct parameters from your local ISP in the fields
which appear below.
Select Static IP Address if all the Internet ports' IP
information is provided to you by your ISP (Internet
Service Provider). You will need to enter the IP
address, Netmask, Gateway, and DNS Server provided
to you by your ISP.
Each IP address entered in the fields must be in the
appropriate IP form, which are four octets separated by
a dot (x.x.x.x). The LoRaWAN Gateway will not accept
the IP address if it is not in this format.
Static
IP Address
Enter the IP address assigned by your ISP.
Netmask
Enter the Subnet Mask assigned by your ISP.
Gateway
Enter the Gateway assigned by your ISP.
DNS Server
The DNS server information will be supplied by your
ISP.
Select DHCP Client to obtain IP Address information
DHCP
automatically from your ISP.
- 66 -
Industrial LoRaWAN Gateway
Description
LCG-300 series