Diagnostics - Planet Networking & Communication LCG-300 Series User Manual

4.11.7

Diagnostics

The page allows you to issue ICMP PING packets to troubleshoot IP connectivity issues. After you
press "Ping", ICMP packets are transmitted, and the sequence number and roundtrip time are
displayed upon reception of a reply. The Page refreshes automatically until responses to all packets are
received, or until a timeout occurs as shown in
Object
Interface
Target Host
Number of Packets
Ping
Be sure the target IP address is within the same network subnet of the LoRaWAN
Gateway, or you have to set up the correct gateway IP address.
Figure 4-11-7
Figure 4-11-7: Diagnostics
Description
Select an interface of the LoRaWAN Gateway
The destination IP Address or domain.
Set the number of packets that will be transmitted; the
maximum is 100.
The time of ping.
- 126 -
Industrial LoRaWAN Gateway
LCG-300 series