4.4.7
SNMP
This page provides SNMP setting as shown in
Object
Enable SNMP
Read/Write Community
System Name
System Location
System Contact
Apply Settings
Cancel Changes
Figure 4-4-21.
Figure 4-4-21: SNMP
Disable or enable the SNMP function.
The default configuration is enabled.
Allows entering characters for SNMP Read/Write Community of the
LoRaWAN Gateway
Allows entering characters for system name of the LoRaWAN
Gateway
Allows entering characters for system location of the LoRaWAN
Gateway
Allows entering characters for system contact of the LoRaWAN
Gateway
Press this button to save and apply changes.
Press this button to undo any changes made locally and revert to
previously saved values.
- 55 -
Industrial LoRaWAN Gateway
Description
LCG-300 series