Port Forwarding - Planet Networking & Communication LCG-300 Series User Manual

4.8.5

Port Forwarding

Entries in this table allow you to automatically redirect common network services to a specific machine
behind the NAT firewall as shown in
some sort of server like a web server or mail server on the private local network behind your LoRaWAN
Gateway's NAT firewall.
Object
Port Forwarding
Add Port Forwarding Rule
Object
Rule Name
Protocol
External Service Port
Figure 4-7-8. These settings are only necessary if you wish to host
Figure 4-7-8: Port Forwarding
Set the function as enable or disable.
Go to the Add Port Forwarding Rule page to add a new rule.
Figure 4-7-9: Port Forwarding Rule Setting
Enter any words for recognition.
Select the protocol type (TCP, UDP or both). If you are unsure,
please leave it to the default both protocols.
Enter the external ports you want to control. For TCP and UDP
services, enter the beginning of the range of port numbers used by
the service. If the service uses a single port number, enter it in both
- 97 -
Industrial LoRaWAN Gateway
Description
Description
LCG-300 series