Lora - Planet Networking & Communication LCG-300 Series User Manual

4.7.1

LoRa

This page provides LoRa configuration as shown in
Object
Keep Alive Period (sec)
Frequency Plan
Figure
Figure 4-6-2: LoRa configuration
After the configured length of time, the Gateway will issue a Pull
request to the specified IP address to confirm its connection is still
active.
Set the frequency plan to match the end node we use, so to receive
the LoRaWAN packets from the LoRaWAN sensor
EU:863~870MHz (IN865/EU868/RU864)
US: 902~928MHz (US915/AU915/KR920/AS923)
- 86 -
Industrial LoRaWAN Gateway
4-6-2.
Description
LCG-300 series