Planet Networking & Communication LCG-300 Series User Manual page 41

Step 2: LAN Interface
Set up the IP Address and Subnet Mask for the LAN interface as shown in
Object
IP Address
Subnet Mask
DHCP Server
Start IP Address
Maximum DHCP Users
Next
Cancel
Figure 4-4-4: Setup Wizard – LAN Configuration
Enter the IP address of your LoRaWAN Gateway The default is
192.168.1.1.
An address code that determines the size of the network. Normally
use 255.255.255.0 as the subnet mask.
By default, the DHCP Server is enabled.
If user needs to disable the function, please uncheck the box.
By default, the start IP address is 192.168.1.100.
Please do not set it to the same IP address of the LoRaWAN Gateway
By default, the maximum DHCP users are 101, which means the
LoRaWAN Gateway will provide DHCP client with IP address from
192.168.1.100 to 192.168.1.200 when the start IP address is
192.168.1.100.
Press this button to do the next step.
Press this button to undo any changes made locally and revert to
previously saved values.
- 41 -
Industrial LoRaWAN Gateway
Figure 4-4-4.
Description
LCG-300 series